]]>
LearnNext
Get a free home demo of LearnNext

Available for CBSE, ICSE and State Board syllabus.
Call our LearnNext Expert on 1800 419 1234 (tollfree)
OR submit details below for a call back

clear

Shadows and Pin Hole Camera

89,006 Views
Have a doubt? Clear it now.
live_help Have a doubt, Ask our Expert Ask Now

Shadows and Pin Hole Camera - Lesson Summary

Shadow
A shadow is a dark patch formed behind an opaque object when it is placed in the path of light. A shadow is formed only when a light source, an opaque object and a screen are present. For example, during a lunar eclipse, we see a part of the earth’s shadow on the surface of the moon. This happens when the earth, the sun and the moon are in a straight line, with the earth between the sun and the moon. Here, the sun acts as the light source, the earth as the opaque object, and the moon as the screen. Shadows are formed due to the rectilinear propagation of light. The size and shape of the shadow depends on the position and orientation of the opaque object between the source of light and the screen. 

Whatever be the colour of the object, its shadow is always black because the shadow region  is not illuminated by light. The length and shape of a shadow depends on the object by which it is formed. In the olden days, shadows caused by objects placed in the sun were used to measure time. Such a device is called a sun dial. The Jantar Mantar in Jaipur consists of a sundial or Samrat Yantra, which can be used to tell the time, as its shadow moves visibly at one millimetre per second, or roughly six centimetres every minute.

Pinhole Camera
The pinhole camera works on the principle that light travels in a straight line. The image formed by a pinhole camera is real, inverted and diminished in size when compared to the original object.  Pinhole cameras are inexpensive and are easy to make. An eclipse can be viewed using a pinhole camera.

Making a Pinhole Camera
     •  Take two rectangular boxes that fit into one another without leaving any gap.
     •  Cut open one side of each box.
     •  Make a small hole in the larger box at the centre of the closed end opposite to the side that has been cut open.
     •  Cut a square of side five centimetres in the smaller box in the closed end opposite to the side that has been cut open. Cover this square with tracing paper.
     •  Finally, slide the smaller box into the larger box, ensuring that the pinhole and the tracing paper are in line with one another, but at the opposite ends.
     •  Slide the smaller box to adjust the focus so that you can capture the image of any object you want.

This is the basic structure of the pinhole camera. However, the developed form of a pinhole camera uses photosensitive film instead of translucent paper to capture images. The film can be developed later to obtain photo prints. Nowadays, of course, we use digital cameras that store images in a computer chip. However, the basic principle of capturing the image remains the same.

Differences between A Shadow and A Pinhole Camera Image
     •  A shadow is in general black and does not give the details of the object.  The image formed by a pinhole camera is colourful and contains all the details of the object.
     •  A shadow can be bigger than the object whereas the image formed by a pinhole camera is always smaller than the object.
     •  The shape of a shadow varies depending on the orientation of the object between the light and screen while the pinhole camera image is always inverted and has the same shape as the object.

Comments(0)

Feel the LearnNext Experience on App

Download app, watch sample animated video lessons and get a free trial.

Desktop Download Now
Tablet
Mobile
Try LearnNext at home

Get a free home demo. Book an appointment now!

GET DEMO AT HOME